网络小说排行榜,最好看的小说排行

Products

JS-8100
Two component car lamp adhesive

This JS-8100 two-component special car lamp adhesive is a two-component, neutral, and fast curing silicone sealant.

1. Toughened elastomer after curing;

2. Stable performance within the range of -55 ℃ to 180 ℃;

3. Without the use of primer, it can bond most materials such as metal, plastic, ceramics, and glass;

4. Convenient construction, suitable for assembly line production;

5. The recommended usage ratio is 8 to 10:1 (weight ratio)

Product parameters

Main parameters of JS-8100

Before curing	Sample standard（Volume ratio 8:1）
Appearance	Paste
Sagmm	≤3
Tack-Free Time min（23℃）/min	≤120
After curing（7天，23±2℃；50±5%RH）
Appearance	Elastic rubber
Hardness Shore A	≥30
Tensile strength Mpa	≥1.2
Elongation at Break%	≥150

Test conditions: temperature 23 ± 2 ℃, relative humidity 50 ± 5%. The data in the table is for reference only, please refer to the measured data

Operation and Safety

Anticipated matters:
Please read the safety manual before use to learn about preventive measures and safety recommendations. For chemicals that do not require labeling, observe in advance and take corresponding preventive measures.
Action:
The construction site should have a good ventilation system.
Surface treatment: The substrate surface needs to be dry and clean to remove stress, static electricity, dust, oil stains, etc.
Bonding: Squeeze the gel onto the cleaned surface with a glue gun to distribute it evenly. If the temperature is low, the curing time will be extended.
After applying the adhesive, please immediately assemble the components together so that the adhesive can achieve good wetting effect, which will help with the bonding effect.
If the assembled components are stored in a dry environment (with a relative humidity of less than 50%), it is recommended to increase the humidity to ensure a suitable curing and crosslinking speed.
Cleaning:
After a certain period of curing, alcohol or acetone can be used to clean excess adhesive in a timely manner. The fully cured adhesive is difficult to remove and may require long-term immersion in an alcohol solvent to remove.
matters needing attention:
--Ready to use and do not expose to air for extended periods of time.
--Maintain first in, first out use of materials.
--Use in a well ventilated area.
--Do not eat in the workplace.